Required Data
◼ Engine power in HP or KW;
◼ Engine type: electric, explosion or turbine;
◼ Rotation (RPM);
◼ Shaft diameter, or flywheel diameter (in the case of an internal combustion engine);
◼ Type of machine to be coupled and diameter of its shaft;
◼ Service factor (cf. table No. 1)
Table 1 - Service Factors (FS)
IMPORTANT: For combustion engines with four (4) or more cylinders, add 1.0 to the service factor found.
Transmission by nominal HP
IMPORTANT: Once the hubs have been machined and mounted to the corresponding axes, they must be spaced apart from each other, respecting the distance (G) according to table 4 (see catalogue). With tolerance of +/- 0.5mm. These measures must be adhered to as this will facilitate the assembly and proper functioning of the coupling.